Call For Paper
Paper Submission Due:
May 20, 2021 22:00 AOE
Notification of Acceptance:
June 20, 2021
June 28, 2021
Camera-Ready Paper Due:
June 30, 2021
July 30 – August 1, 2021
Prof. Ney Augusto Dumont
Ney Augusto Dumont is a Professor and Head of the Department of Civil and Environmental Engineering at the Pontifical Catholic University of Rio de Janeiro (PUC-Rio), Brazil. He received his BS degree in Civil Engineering at the Federal University of Bahia, Brazil, in 1972, and the MS and Dr.-Ing. degrees in Structural Engineering at PUC-Rio, in 1973, and at the Technische Universität Darmstadt, Germany, in 1978, respectively. His research interests are in computational mechanics, variational methods, hybrid methods, FEM, BEM, fracture mechanics, time-dependent problems and gradient elasticity. He has over 150 publications in international journals, conference proceedings, and book chapters. He is Distinguished Fellow of ICCES since 2014.
Prof. Rama Govindarajan
Rama Govindarajan is the professor of International Centre for Theoretical Sciences. Her Research interests include Fluid dynamics flow instability, vortex dynamics, stratified and interfacial flows – on scales from laboratory to ocean and atmosphere. Her recognition includes Platinum Jubilee Prize, Aerospace Engineering Department, Indian Institute of Science, Fellow of the American Physical Society (Division of Fluid Dynamics), Fellow of the Indian Academy of Sciences, Bangalore and so on.
Prof. Wanlin Guo
Wanlin GUO, Ph.D. Academician of Chinese Academy of Sciences, chair Professor in mechanics and nanoscience, founder and director of the Key Laboratory of Intelligent Nano Materials and Devices of Ministry of Education and the Institute of Nanoscience of Nanjing University of Aeronautics and Astronautics. He received the National Science Foundation of China for Distinguished Young Scholars in 1996 and the honor of Cheung Kong Scholars in 1999. In 2005, he leaded a team in Nanoscale Physical Mechanics enters the Cheung Kong Scholars Excellent Team Programme of the Ministry of Education of China. In 2010, he founded Key Laboratory of Intelligent Nano Materials and Devices of the Ministry of Education of China. In 2012, he obtained the National Nature Science Prize of China. He has published 400+ refereed papers in mechanics-related journals such as Nature Nanotech, Nature Comm., Phys. Rev. Lett., Nano Lett., J. Am. Chem. Soc., Adv. Mater., J. Mech. Phys. Solids, Phys. Rev. B, Appl. Phys. Lett., Int. J. Strct. Solids, Int. J. Fracture, Int. J. Fatigue, Int. J. Plasticity, Engng Fracture Mech. et al. His current research focuses on 1) three dimensional fatigue fracture and damage tolerance and durability design of structures; 2) intelligent nano materials and devices, multiscale physical mechanics, novel conception and technology for efficient energy conversion; 3) molecular physical mechanics for neuronal signaling and molecular biomimics.
Prof. Gwo-Bin Lee
Gwo-Bin Lee received his Ph.D. in Mechanical & Aerospace Engineering from University of California, Los Angeles, USA in 1998. Dr. Gwo-Bin Lee is currently a Chair Professor in the Department of Power Mechanical Engineering at National Tsing Hua University. His research interests lie on nano-biotechnology, micro/nanofluidics and their biomedical applications. He is the directors of “MEMS Design and Microfabrication Lab" and“Microfluidic Biochips Lab” Dr. Lee has been very active in the field of micro/nanofluidic systems, and has developed integrated micro/nano systems incorporated with nano/biotechnology for biomedical applications. He has developed several micro/nano-scale platforms for cell, protein, and DNA manipulation and detection. Dr. Lee has published over 290 SCI journal papers, 390 conference papers, and filed 155 patents (112 patents granted) in the past 21 years. His works have been highly cited (over 8200 times) with an H-index of 48 (ISI). In Google Scholar, citations of all Dr. Lee’s papers are 13400 times with an h-index of 65. He also published 8 book chapters. He has served as a technical or organizing committee member in many international conferences. He is the General Co-chair of Micro TAS 2018. He was the General Co-chair of IEEE NEMS 2014, IEEE MEMS 2013 and IEEE NANOMED 2013 and General chair of IEEE NEMS 2011.
Prof. Yoichiro Matsumoto
Dr.Matsumoto is appointed as President of Tokyo University of Science in April, 2018. Before this appointment, he was Executive Director of RIKEN from 2015 to 2018. Dr. Matsumoto received his Bachelor's, Master's and Doctoral degrees all from the University of Tokyo in Mechanical Engineering respectively in 1972, 1974 and 1977. He became Lecturer of the same University in 1977, Associate Professor in 1978 and full professor in 1992. He served as Dean of School of Engineering from 2006 to 2008, and served as Executive Vice President from 2009 to 2015. He is now Professor Emeritus of the University of Tokyo. Dr. Matsumoto's recent scientific interests are computational engineering, fluids engineering and biomedical engineering. His research works have received numerous awards; ASME Calvin W. Rice Lecture Award in 2005, JSME Medals for Outstanding Paper, JSME Fluids Engineering Award, JACM Award for Computational Mechanics in 2007, APACM Award for Computational Mechanics in 2010, ASME Ted Belytschko Applied Mechanics Award in 2010, JSME Medal for Outstanding Paper in 2011 and JSMF Lifetime Achievement Award in 2016. He served as President of the Japan Society of Fluid Mechanics in 2004, President of the Visualization Society of Japan in 2007 and President of the Japan Society of Mechanical Engineers in 2010. He is honorary members of VSJ and JSME and Life Time Member of ASME. He is fellows of JSFM, JSME and ASME and member of the Engineering Academy of Japan and cooperation member of Science Council of Japan.
Yoshiharu Morimoto, the Emeritus Professor at Wakayama University, holding the position of CEO, Chairman of 4D Sensor Inc., Japan. He received the Ph.D. degree in Mechanical Engineering Department from Osaka University, 1981.
Area of Achievement
Image processing and optical methods for shape and deformation measurement
He is developing high-speed, highly-accurate and low-cost measurement systems using some optical methods and image processing methods for shape, deformation, and stress and strain measurement.
He developed some optical methods and image processing methods for shape, deformation, and stress and strain measurement.
Prof. Hidekazu MURAKAWA
Hidekazu Murakawa, the Emeritus Professor of Joining and Welding Research Institute, Osaka University, Japan. His research interest includes Computational Nonlinear Mechanics, Computational Welding Mechanics(Cutting, Forming, Welding, Straightening, Distortion, Residual Stress, Crack Growth). He received ICCES’04, The K. Washizu Medal, 2004, Japan Welding Society, Best Paper Award, 2002, Japan Society of Naval Architects, Best Paper Award, 1994, International Society of Offshore and Polar Engineers, Best Paper Award, 1992 and American Society of Mechanical Engineers (OMAE), Best Paper Award, 1990.
Prof. Demosthenes Polyzos
Demosthenes Polyzos is Professor of the Department of Mechanical Engineering & Aeronautics, Division of Applied Mechanics and Biomechanics of the University of Patras in Greece. His research activities include wave propagation phenomena in materials and structures, computational mechanics, Boundary Element Method, Meshless Methods, modeling in non-destructive testing, homogenization techniques, mechanics of materials and biomaterials with microstructural effects and computational methods in bioengineering. He is Regional Editor of the International Journal CMES: Computer Modelling in Engineering and Sciences and organizer of many National and International Conferences. His contribution includes 95 articles in International Refereed Journals, 21 articles in books and 120 articles in proceedings of International and National Conferences. He participated in many National and EU projects. He is recipient of P.S. Theocharis award by the Academy of Athens and S.N. Atluri medal in recognition of his “outstanding contributions to boundary element methods in general”. He is invited speaker in many Universities, Conferences and Institutes. Currently is Vice Rector of Research and Development and President of the Special Account of Research Funds and the Unit of Research, Innovation & Entrepreneurship of the University of Patras.
Prof. Ivatury S. Raju
During the past four decades at NASA Langley Research Center, Dr. Raju’s research focused on Fracture Mechanics, Durability and Damage Tolerance, Composite Materials, and development of advanced Structural Analysis Methods such as Finite Element, Boundary Element, and Meshless Methods. Dr. Raju held various positions such as Head of the Mechanics of Materials Branch in the Materials Division; Head of the Analytical and Computational Methods Branch and Senior Technologist of Structures and Materials, NASA Engineering and Safety Center’s (NESC) Structures Discipline Expert, and NASA Technical Fellow for Structures. He made significant contributions to various NASA programs such as the Aircraft Energy Efficiency, Advanced Composite Technology, Aging Aircraft, and Vehicle Systems Programs. During his career, Dr. Raju was called on to participate in many major failure investigations – 7’ x 10’ fan blade failure at Langley, Challenger SRB field joint, X-33 Composite tank failure, and the AA 587 Airbus A300-600 rudder failure. During his Tech Fellow’s position at the NESC, Dr. Raju’s work focused on finding solutions to ensure safe operations of several programs such as Space Shuttle, the International Space Station, the Ares rockets of the Constellation, and the Commercial Crew Program. Dr. Raju retired from NASA Langley in March 2017. He currently serves gratuitously as Distinguished Research Associate at NASA Langley.
Prof. Shengping SHEN
Shengping SHEN, is the Dean and professor of School of Aerospace Engineering, Xi’an Jiaotong University. He was awarded China National Funds for Distinguished Young Scientists, Changjiang Scholars Professor, and Distinguished Fellow of ICCES. His research interests focus on flexoelectric materials & devices, Chemomechanics, Fatigue & Fracture. He has coauthored a monographs, and is an author of over 100 journal articles. Through the years, his research work has received supports from Chinese governmental agencies such as NSFC, 863 Program, and MOE etc. He serves in the editorial boards for some journals. He has been in the organization/scientific committee for a number of international conferences.
Prof. Ramesh K. Agarwal
Professor Ramesh K. Agarwal is the William Palm Professor of Engineering in the department of Mechanical Engineering and Materials Science at Washington University in St. Louis. From 1994 to 2001, he was the Sam Bloomfield Distinguished Professor and Executive Director of the National Institute for Aviation Research at Wichita State University in Kansas. From 1978 to 1994, he was the Program Director and McDonnell Douglas Fellow at McDonnell Douglas Research Laboratories in St. Louis. Dr. Agarwal received Ph.D in Aeronautical Sciences from Stanford University in 1975, M.S. in Aeronautical Engineering from the University of Minnesota in 1969 and B.S. in Mechanical Engineering from Indian Institute of Technology, Kharagpur, India in 1968. Over a period of 40 years, Professor Agarwal has worked in various areas of Computational Science and Engineering - Computational Fluid Dynamics (CFD), Computational Acoustics and Electromagnetics, Computational Materials Science and Manufacturing, and Computational Geo-mechanics and Combustion. He is the author and coauthor of over 600 publications. He has given many plenary, keynote and invited lectures at various national and international conferences worldwide in over fifty countries. Professor Agarwal continues to serve on many academic, government, and industrial advisory committees. Dr. Agarwal is a Fellow twenty two societies including the American Society of Mechanical Engineers (ASME), Institute of Electrical and Electronics Engineers (IEEE), American Society of Civil Engineers (ASCE), American Association for Advancement of Science (AAAS), American Physical Society (APS), American Institute of Aeronautics and Astronautics (AIAA), Royal Aeronautical Society, and American Society for Engineering Education (ASEE). He has received many prestigious honors and national/international awards from various professional societies and organizations.
Prof. Yongchang Cai
Yongchang CAI is a Professor of Geotechnical Engineering in the College of Civil Engineering, Tongji University, China. He received the Ph.D. degree from Chongqing University in 2001. His research interests include computational theory/method in Geomechanics and their application in geotechnical engineering, and high performance finite element technologies for nonlinear analyses of space frame/plate/shell structures.
Prof. Maosen Cao
Dr. Cao is the full professor in the Department of Engineering Mechanics at Hohai University, PRC. His specific areas of interest relate to structural durability and integrity assessment, health monitoring, damage modeling and identification, disaster prevention and mitigation, and multiscale vibration and dynamics. He is currently director of the Institute of Engineering Vibration and Dynamic Disaster of the University; deputy dean of the Co-Innovation Centre of Safety and Health on Key Civil Infrastructures (involving 9 universities and institutes); dean of academic work committee of the Theoretical and Applied Mechanics Society of Jiangsu Province; principal of Outstanding S&T Innovation Team in Structural Integrity and Safety; standing director of the Chinese Society of Health Monitoring and Risk Warning of Equipment & Structure; member of ASCE, ASME, IEEE, and SPIE. Dr Cao has contributed to a number of international conferences. He was the Chair of the 19th International Conference on Vibration Theories, Approaches and Technologies in Infrastructure Engineering, the Vice-Chair of Organization Committee of the 3rd International Conference on Structural Health Monitoring and Integrity Management, and the Technical Committee Chair of the 3rd Annual Conference of Mechanics and Mechanical Engineering. He has delivered over 40 plenary speeches, invited talks, and public seminars at international conferences and universities in various countries. He is currently a member of the Editorial Board of the Journal of Vibroengineering, Vibroengineering Procedia, and the Journal of Measurement in Engineering, and was the Guest Editor of Complexity, Shock and Vibration, etc. Research outcomes have brought significant honors and awards, typically the prestigious European-Chinese Dragon-STAR Innovation Award, funded by the European Commission; and two National Natural Science Awards of MOE in PRC.
Prof. Wen Chen
Dr.Wen Chen received PhD from Shanghai Jiao Tong University. His research activities include computational mechanics, hydrodynamics, and acoustics, as summarized in his 300 plus academic journal papers and 4 monographs with more than 3000 non-self SCI citations. His current interests center on RBF-based numerical simulation, anomalous diffusion and non-local statistics of soft matter mechanics. He is Associate director of “Chinese Society of Environmental Mechanics”, the former TC chair of computational mechanics software under China Mechanics Society, the IFAC (the International Federation of Automatic Control) TC member on Linear Control Systems. He is the principle investigator of 40 academic or industrial projects and is serving as Associate Editor or on Editorial Board of 12 journals, among which the 5 international journals are indexed by SCI.
Prof. Honghua Dai
Mr Dai received his B.S. degree in mechanical engineering from Northwestern Polytechnical University (NPU), Xi’an, China, in 2009. He achieved the PhD degree in flight vehicle design from the School of Astronautics, NPU, in 2014. He had been a visiting PhD student in University of California, Irvine from 2010 to 2012 under the advice of Prof. Satya N. Atluri. He is now an Associate Professor with the School of Astronautics, NPU since December 2014. His current research interests include: spacecraft dynamics and control, nonlinear structural dynamics, and robust control methods, etc. Prof. Dai received 2017 ICCES Outstanding Young Investigator Award; 2017 Hong Kong Scholar Award, 2015 Science and Technology Award of Shaanxi Province: Frist Prize; 2013 Outstanding Young Researcher Award of NPU. Prof. Dai is an AIAA Senior member.
Prof. Leiting Dong
Dr. Leiting Dong is currently a full professor in the Department of Aircraft Design in Beihang University (also known as Beijing University of Aeronautics & Astronautics). He focuses his studies in modeling methods for the design of aerospace structures and materials. Special interests include fatigue and damage tolerance design of complex metal components, multiscale analysis and design of composite materials and structures, and large deformation analysis of geometrically nonlinear structures. His research is funded by the Ministry of Science and Technology, etc. By far he has published more than 35 peer-reviewed journal articles, with an h-index 15. He won the Thousand Young Talents Award of China in 2015. He won the CMES Outstanding Young Author Award in 2015, and the ICCES Young Investigator Award in 2017.
Prof. Hideki FUjii
Hideki Fujii is a lecturer at School of Engineering, the University of Tokyo. He received the Ph.D. in Environmental Studies from Graduate School of Frontier Sciences, the University of Tokyo in 2009. His experience includes being a project assistant professor of the Value Creating Initiative Division, Research Into Artifacts, Center for Engineering, the University of Tokyo (2009-2010); a visiting researcher at Faculty V of Mechanical Engineering and Transport Systems, Technical University of Berlin (2017-2018). He has been working on multi-agent-based traffic and social system simulation with real world's applications. One of his achievements was published as an open-source traffic simulator, ADVENTURE_Mates. This large-scale and microscopic simulator is used for many purposes: transportation policy making, evaluation of traffic safety, introducing new transportation-related technologies, prediction of greenhouse effect gas emissions, etc. His professional membership include International Association on Computational Mechanics, World Conference on Transportation Research Society, Japanese Society for Artificial Intelligence, Information Processing Society of Japan.
Prof. Boyun Guo
University of Louisiana at Lafayette, Lafayette, LA –Professor and Graduate Coordinator in Petroleum Engineering. Director of Center for Optimization of Petroleum Systems (COPS). His award includes Distinguished Professor, UL Lafayette, 2017, Researcher of the Year Award, UL Lafayette College of Engineering, 2016 and Distinguished Achievement Award for Petroleum Engineering Faculty, SPE Eastern Region, 2012. Beside this, a several of his patents as follows. US Patent No. 5473904: Method and Apparatus for Generating, Transporting and Dissociating Gas Hydrates, US Patent pending EFS ID 31417983: Harvesting Natural Gas from Seafloor Gas Hydrates Using Moving Riser Method and China Patent No. 201010245400: A New Design of Annular Flow Diverging Joint (FDJ) and Calculation Method for Gas Drilling.
Prof. Ryutaro HIMENO
Ryutaro HIMENO is now the director of Advanced Center for Computing and Communication. He is also a visiting Professor at Hokkaido University, Tokyo University of Science and Tokyo Denki University. His research area is Computational Fluid Dynamics and Sports Biomechanics. He is also a well-known researcher in Baseball Physics as one of inventors of Gyro ball. He was a winner of 2006 Gordon Bell Prize (Honorable Mention, Peak Performance) and Computer Visualization Contest in 2000 by Nikkei Science. He received both JSME Computational Mechanics Award and Computational Award by Japan Association of Computational Mechanics in 2011 as well as JSME Computational Mechanics Achievement Award in 1997 and JSME Youth Engineer Award in 1988. He was also awarded Paper Award by NICOGRAPH in 1993, Giga FLOPS Award by CRAY Research Inc. in 1990 and other awards.
Prof. Chao Jiang
Dr. Chao Jiang is the professor of College of Mechanical & Vehicle Engineering of Hunan University, China. He is holder of the National Science Fund for Distinguished Young Scholars, Young Scholar of Chang Jiang Scholars Program, etc. As a principal member, Prof. Jiang has won the Second Prize of National Science and Technology Progress Award of China, and three provincial and ministerial First Prizes for Progress in Science and Technology and Natural Science. His research interests are focused on structural uncertainty analysis and design, reliability analysis and design, fatigue, etc. He has presided over 20 national and provincial/ministerial level research projects, and has published more than 100 SCI-indexed papers with over 1000 SCI citations by other scholars.
Prof. Kazuhiko Kakuda
Dr. Kazuhiko Kakuda is a Professor in the Dept. of Mathematical Information Engineering, College of Industrial Technology, Nihon University. He was born on January 26, 1958 in Shizuoka-prefecture, Japan. He holds B.Eng in Mathematical Engineering, M.Eng in Architecture & Architectural Engineering and Dr. Eng in Mathematical Engineering from Nihon University. His research interests include the numerical simulations of complex fluid flow fields, the parallel computing on CPU/GPU, and the development of the numerical methods for nonlinear problems. He is a councilor of the Japan Society for Computational Methods in Engineering (JASCOME). He is a member of JSME, AIJ, JSCES and so forth. He is Distinguished Fellow of ICCES since 2015.
Prof. Edward Kansa
Awarded the 2015 George Green medal for inventing the application of meshless radial basis functions for the numerical solutions of partial differential and integral equations. Plenary and keynote speaker on many occasions, co-supervised of 15 Ph.D. dissertations, over 130 publications, 6000+ citations, plenary and keynote speaker, reviewer for peer-reviewed journals, international colloborator.
Research performed in quantum physics, atmospheric and surface flow and transport, combustion and shocks, turbulent dispersion, drying, etc. Ph.D. Vanderbilt University, employed at US Bureau of Mines, Lawrence Livermore Laboratory, Embry-Riddle University, University of California at Davis, Computational Sciences, Convergent Solutions.
Prof. Hiroshi Kawai
Hiroshi Kawai is a professor at Faculty of Information Sciences and Arts, Toyo University. He has worked on the Finite Element Method, Mesh Generation, Visualization, High Performance Computing, Fracture Mechanics etc. Currently, his research interests are in the field of Computational Mechanics for huge scale analysis on HPC environment. He has proposed and developed an integrated CAE system for large scale finite element analysis, including efficient tetrahedral element-based mesh generation, visualization and performance tuning of linear algebraic solver for domain decomposition method. He has published 50 archival papers in international and domestic journals. He has made a numerous international and domestic conference presentations. He was the recipient of The JACM (Japan Association for Computational Mechanics) Computational Mechanics Award.
Prof. Reifsnider, Kenneth
Dr.Reifsnider is an expert on advanced material behavior and response, and is Director of the Institute for Predictive Performance Methodologies at UTARI. He is a recognized expert in high-temperature energy systems and composite materials. Dr.Reifsnider holds the Presidential Distinguished Professorship at UTA and is an elected member of the National Academy of Engineering and the National Academy of Inventors. He previously served as director of the Solid Oxide Fuel Cell Center of Excellence at the University of South Carolina, where he led that state’s effort to develop solid oxide fuel cells for applications in society. In 2004, he was elected to the National Academy of Engineering for the development of strength-life prediction relationships in composite materials. He also served two terms as a White House appointee to the U.S. Air Force National Scientific Advisory Board. He has over 200 archival publications and has been invited to lecture on material systems in 18 countries.
Prof. Albert S. Kobayashi
Dr. Albert S. Kobayashi has been professor emeritus in the Department of Mechanical Engineering, University of Washington, since June 1997. Dr. Kobayashi is a member of the National Academy of Engineering, a Fellow of the American Society of Mechanical Engineers (ASME), Honorary Life Member of the Society for Experimental Mechanics (formerly SESA and now SEM) and member of the American Academy of Mechanics. He was the president of SEM for 1989-90. His publications, which exceed 500, cover the fields of experimental stress analysis, finite element analysis, and biomechanics in addition to his main interest in fracture mechanics. He was the recipient of the Order of the Rising Sun, Gold Rays with Neck Ribbon (Kun Santou Kyokujitsu Chuujusho) from the emperor of Japan on April 29, 1997, the ASME Daniel Drucker Medal in 2007 and the ASME Nadai Medal in 2010. He was elected Honorary Fellow of the International Congress of Fracture in March 2005, to the Hall of Fame of the UW Department of Mechanical Engineering in August 2006 and received the College of Engineering Diamond Award for distinguished academic achievement in May 2013.
Prof. Chang-Chun Lee
Chang-Chun Lee has published more than 250 journal/conference papers in the area of computational solid mechanics, mechanical designs/integrations of three-dimensional integrated circuit (3D-IC) system, back-end-of-line (BEOL) physical reliability investigation of nano-micro devices, strained silicon engineering, and advanced electronic packaging/micro-electro-mechanical systems (MEMS) technology. He was responsible for more than 40 electronic packaging/MEMS and display technology project related to flexible organic light-emitting diode (OLED) devices, package simulation/design, and reliability estimation of 3D-ICs. He owns 9 Taiwan patents for wafer-level probe tests, flip chip/3D stacked wafer level packaging, and system in packaging. Professor Lee received an Outstanding Paper Award at the ANSYS Conference. Currently, he serves as the associate Editor of Journal of Mechanics, guest editor of IEEE Transactions on Components, Packaging and Manufacturing Technology, member of Thermal/Mechanical Simulation & Characterization Committee in IEEE Electronic Components and Technology Conference (ECTC), a technical program committee member of the Institute of Electrical and Electronic Engineers IMPACT, and a reviewer of more than 41 Science Citation Index (SCI) journals. His recent research focuses on the robust designs of electronic packaging reliability, mechanical designs of flexible displays, SiC/SiGe/GeSn strained techniques in metal–oxide–semiconductor field-effect transistors, phenomenon analysis of stress-migration/electro-migration in advanced IC devices, as well as the interfacial fracture investigation of Cu/low-k interconnects.
Prof. H.K. Lee
H.K. Lee, Professor in the Civil and Environmental Engineering Department at Korea Advanced Institute of Science and Technology (KAIST), received his B.S. and M.S. degrees from Seoul National University, Korea, in 1988 and 1990, respectively, and earned his Ph.D. degree in Civil Engineering from the University of California, Los Angeles in 1998. His research interests are multi- and cross-disciplinary, and are primarily concerned with development of sustainable and functional construction materials with an emphasis on the integration with nano- and bio-technology, and multiscale modelling of advanced engineering materials. Currently, he is the director of Engineering Research Center for Smart Submerged Floating Tunnel System, the Vice President of Computational Structural Engineering Institute of Korea (COSEIK) and Korea Society for Computational Mechanics (KSCM), a General Council Member of International Association of Computational Mechanics (IACM), and is a fellow of The Korean Academy of Science and Technology (KAST), and an honorable fellow of International Conference on Computational and Experimental Engineering and Sciences (ICCES).
Prof. Chein-Shan Liu
Dr. Chein-Shan Liu is presently a Chair Professor of National Taiwan Ocean University and a distinguished Professor of Thousand Talents Plan of China, recruited by Hohai University. His research interests can be categorized into two major areas. One is material characterization including constitutive modeling, plasticity, micromagnetism, friction behavior, thermodynamics, and applied mechanics. Another is computational mathematics and modeling, including group-preserving scheme, Lie-group shooting method, Lie-group adaptive method, Lie-group differential algebraic equations (LGDAE) method, novel algorithms for nonlinear algebraic equations, regularization methods, inverse problems, optimization problems, Krylov subspace method for ill-posed linear systems and nonlinear systems, and novel meshless methods, like multiple-scale Trefftz method, multiple-direction Trefftz method, energy Trefftz method, energy MFS and boundary functional method. Dr. Liu has published over 330 SCI papers and obtained several national or international academic awards, including Highly Cited Researcher, State Specially Recruited Expert of China and Outstanding Chinese Award for Engineering Technology.
Prof. Pedro Marcal
Dr. Marcal is the author of over 100 scientific papers on Finite Element Analysis, Fatigue and Fracture, Risk Analysis and AI (expert Systems). He has helped organize many scientific meetings on Computational Structural Mechanics. Since 2005, Dr. Marcal has been active in NLP. The main objective is the development of a code to understand meaning using Conceptual Dependency. Along the way he has developed new methods to perform syntax free parsing (99.5 % accuracy) and semantic parsing, general purpose Named Entity Recognition, The Automatic Natural Language Abstracting and Processing (ANLAP) program and a Japanese English translator (JEMAP) as well as a ChineseóEnglish translator (CEMAP) See www.lifecycleVnV.com
Prof. Shinji Nishiwaki
Shinji Nishiwaki is a Professor at Department of Mechanical Engineering and Science, Kyoto University since 2009. She received the Doctor degree of Michigan, Department of Mechanical Engineering and Applied Mechanics, January 1995 to June 1998. Her working experience include April 2005 – April 2009, Associate Professor, Department of Aeronautics and Astronautics, Kyoto University, April 2002－March 2005, Associate Professor, Department of Precision Engineering, Kyoto University, April 1988 - March 2002, Researcher, Toyota Central R&D Labs., Inc.
Prof. Hiroshi Okada
Hiroshi Okada has worked on the Boundary Element Method, Automobile Crash Analysis, Computational Meso-mechanics analysis such as Homogenization Method, etc. Currently, his research interests are in the field of Computational Engineering Fracture Mechanics. He has proposed efficient and accurate methodologies for the evaluations of linear and nonlinear fracture mechanics parameters from the results of finite element analysis using automatically generated mesh with the tetrahedral finite element. He and his colleagues are developing crack propagation analysis software system. He has published 90 archival papers in international and domestic journals. He has made a numerous international and domestic conference presentations. He was the recipient of The JACM (Japan Association for Computational Mechanics) Computational Mechanics Award.
Prof. M. Ziad Saghir
Prof M. Ziad Saghir is a Professor at Ryerson University and Canada's most experienced reduced-gravity researcher. He is Canada's top performer at leveraging departmental and provincial research funds with national (NSERC, CSA) and international funding agencies to pursue Canadian space science objectives onboard the International Space Station (ISS). His talent as a space scientist and university educator is consistently requested by the international space physical science mission community. He leads a group of very strong graduate students and post-docs that come from academia and industry, with interest in and application to deep hydrocarbon reservoirs. His innovation is recognized internationally through consistent invitations from European researchers that identify him as applying the maximum knowledge gained from long-duration gravity-driven phenomena in fluid physics to industrial processes. He has been PI or Co-I of Foton-M2 and M3 SCCO recoverable satellite missions (2007), the ISS SODI-IVIDIL (2009) and DSC (2010) missions, the ISS SODI-DCMIX mission (2011-15), and was the national coordinator of the CSA discipline working group on the role of gravity in metals and alloys. Canada's contribution to the SODI-DCMIX mission is to clarify the role of gravity on the movement of hydrocarbons across temperature gradients - important knowledge for Canada's deep oil reservoir sector (Hybernia Oil field and Northern exploration of oil reservoir deposits). Over the past decade, Prof. Saghir has been working in collaboration with TOTAL and researchers in France to apply innovation to benefit Canada's competitiveness in hydrocarbon extraction from oil reservoirs, a top priority of the Federal Government. Maintaining a good funding for his scientific participation in ISS missions would allow Canada to leverage in ISS hardware and on-orbit resources from our ISS Partners, and directly apply gravity-driven knowledge to benefit Canada's industry in the energy sector for a priority activity of the Government of Canada. He has published over 200 scientific journal paper related to energy. He is currently the chair of the International conference on Thermal Engineering (www.ictea.ca).
Prof. Guangyu SHI
Dr. Guangyu SHI is a professor in Department of Mechanics, Tianjin University, China. He received his Ph.D. from Georgia Institute of Technology, USA. His research interests include computational solid mechanics, mechanics of composite materials, nonlinear analysis of structures, refined theories of plates and shells, modeling of porous materials, damage and fracture mechanics. He has published over 100 refereed research papers.
Prof. Ryuji Shioya
Ryuji Shioya is Professor of Faculty of Information Sciences and Arts at Toyo University in Japan. He received the B.Eng. in Nuclear Engineering in 1991, the M.Eng. in Nuclear Engineering in 1993 and Ph.D in Quantum Engineering and Systems Science in 1996 from University of Tokyo, Japan. He was an Assistant Professor (1996-1997) at University of Tokyo, Lecturer (1998-2000) and Associate Professor (2000-2008) at Kyushu University, Japan before joining Toyo University. He has extensive research experiences in the field of supercomputing and computational mechanics. He is currently a director of a project, "Development of a Numerical Library based on Hierarchical Domain Decomposition for Post Petascale Simulation", which is one of project in JST (Japan Science and Technology Agency) Basic Research Programs: CREST Development of System Software Technologies for post-Peta Scale High Performance Computing.
Prof. Jan Sladek
Dr. Jan Sladek, researcher worker at the Slovak Academy of Sciences, received his Ph.D. in Applied Mechanics at the Institute of Construction of Architecture, Slovak Academy of Sciences, Slovakia in 1981. Now, he is in the position of the Head of the Department of Mechanics at the same institute. He is also Full Professor at Mechanical Engineering Department of Slovak Technical University and President of Slovak Society for Mechanics. His principal research area is modeling of advanced materials. He has also been a visiting professor/scholar at Cornell University, University of California (Los Angeles, Irvine), Northwestern University, Technical University of Vienna, University of Siegen (Germany), University of Gent (Belgium), Wessex Institute of Technology (U.K.) University of London, Queen Mary College and Shinshu University (Japan). He also serves for five Governmental Scientific Committees in Slovakia and editorial board of seven international journals. He has published 461 refereed papers and 7 monographs (books). His research works are cited more than 7451 (see Google scholar, http://scholar.google.com/citations?user=EuDw2JcAAAAJ&hl=en ). His research works have been honored many times. He has received the Prize of Slovak Academy of Sciences twice (1985, 2003) and the Prize of Slovak Literal Foundation also twice (1986, 1999). He was awarded by Aurel Stodola Prize in 2002 and Eric Reissner medal in 2010 for his distinguished results in mechanics. In 2003 he was elected as a founding member (20 founding members) of the Learning Society of Slovak Academy of Sciences.
Prof. Jurica Sorić
Prof. Sorić is Head of the Chair of Mechanics and Strength of Materials in the Department of Mechanical Engineering and Naval Architecture at the University of Zagreb in Croatia. His research activities are concerned with the field of Computational Mechanics such as finite element formulations, meshless computational approaches and multiscale modeling of heterogeneous materials. He holds a Ph. D. degree from the University of Zagreb. He was awarded “Alexander von Humboldt” Fellowship (a prestigious research fellowship from Germany) and Fulbright Fellowship. He is an associate member of Croatian Academy of Sciences and Arts and a member of Croatian Academy of Engineering. Besides, he is the member of the Board of Central European Association of Computational Mechanics (CEACM), the General Council member of International Association of Computational Mechanics (IACM) and the Scientific Council member of International Centre for Mechanical Sciences in Udine (CISM).
Prof. Tewary Vinod
Dr. Vinod K. Tewary is a theoretical solid-state physicist at the National Institute of Standards and Technology (NIST), Boulder, USA. Before joining NIST, he was a professor of Physics and Dean of Research at the Birla Institute of Technology and Science, Pilani, India. He is the originator of the Green’s function method for lattice statics and has done pioneering research on multiscale Green’s functions for quantum nanostructures. He has done extensive work on diverse applications of static and dynamic Green’s functions to problems in phonons, lattice defects, radiation damage, nanomaterials, semiconductors, composite materials, elastic waves, and scattering theory. He is the author of a monograph on “Mechanics of Fiber Composites” (published by John Wiley), an edited book on Modeling, Characterization and Production of Nanomaterials (published by Elsevier), several review articles, and more than 120 research papers published in international journals of repute. He is the winner of the Pride of India award, Boulder Colorado Multicultural award, Department of Commerce (US Govt.) Bronze medal, and the Eric Reissner medal, Lifetime Achievement award, and the Distinguished Fellowship of the ICCES for his work on Green’s function methods for solids. Outside Physics, he is a published Hindi poet and honorary editor of “Kaavyaalaya,” a highly respected website of Hindi Poetry.
Prof. Igor Vušanović
Igor Vušanović has graduated at University of Belgrade in 1992. He earned his master degree in 1996 at University of Montenegro and PhD in 2002 at the same University. He partially work on his PhD thesis at Purdue University under the supervision of Professor Matthew J. M. Krane. He published as an author and co – author more than 50 articles in scientific peer reviewed international and domestic journals, and international scientific conferences. He organized successfully prestigious ICCES Special symposium on Meshless & Other Novel Computational Methods in 2012, and give invited talks at 5 foreign universities. Igor Vušanović has more than 26 years of professional experience in the field of energy and energy efficiency, modelling in field of materials processing, environmental engineering and thermos-technics. His research area covers: Modelling of phase change phenomena in materials processing, Heat and mass transfer in HVAC systems, advanced technics in numerical modelling, Environmental engineering and sustainable Development. His present position is a Full Professor and Dean of Faculty of Mechanical Engineering at University of Montenegro.
Prof. Tomonori Yamada
Tomonori Yamada is an associate professor at School of Engineering, the University of Tokyo. He received BEng, MEng, Ph.D. degrees from the University of Tokyo in 1995, 1997 and 2003, respectively. He worked for an industrial company (2000-2001), RIKEN (2001-2005), the University of Tokyo (2005-2008, 2012-) and Japan Atomic Energy Agency (2008-2012). His research interest is large scale finite element analysis in fluid-structure interaction problems and his research works have received 2011 JACM Award for Young Investigators in Computational Mechanics, 2010 Young Researcher Award from Computational Science and Engineering Division, AESJ, 2009 JSCES Outstanding Paper Award, 2009 Certificate of Merit: Liquid Propulsion Best Paper from AIAA, 2008 Analytics Challenge Finalists in ACM/IEEE SC2008 and so on.
Prof. Satoru YoneyamaDr. Yoneyama is currently a Professor at Aoyama Gakuin University. He is now serving as an associate technical editor of Experimental Mechanics. Satoru Yoneyama received the Outstanding Paper Award from the Japanese Society for Photoelasticity in 2000, the Rising Researchers Award from JSNDI in 2002, the R.E. Peterson Award from SEM in 2002, the Outstanding Paper Award from JSNDI in 2003, the Incentive Award from JSNDI in 2008, the Technology Award from JSEM in 2008, and A.J. Durelli Award from SEM in 2014. His research interests are optical methods, viscoelasticity, fracture mechanics and contact mechanics. Meanwhile, He is a member of the Society for Experimental Mechanics (SEM), the Japanese Society for Experimental Mechanics (JSEM), the Japan Society of Mechanical Engineers (JSME), the Japanese Society for Non-destructive Inspection (JSNDI), the International Society for Optical Engineering (SPIE), the British Society for Strain Measurement (BSSM), the Society of Materials Science Japan (JSMS), and the Japan Society for Composite Materials (JSCM).
Prof. Shinobu Yoshimura
Shinobu Yoshimura is the Vice President of the University of Tokyo (UTokyo) and the Member of Science Council of Japan. He has published 250 peer reviewed journal papers, 68 review papers and 7 books. Professor Yoshimura has been working on High-performance and Intelligent Computational Mechanics with Real World's Applications for 29 years. Among his wide research activities, the most distinguished and well-recognized achievement is the R&D of the advanced parallel finite element analysis software known as ADVENTURE (http://adventure.sys.t.u-tokyo.ac.jp) since 1997, leading more than 20 investigators.
Prof. Anthony M. Waas
Professor Waas is a Fellow of the American Institute of Aeronautics and Astronautics (AIAA), the American Society of Mechanical Engineering (ASME), and the American Academy of Mechanics (AAM). He is a recipient of several best paper awards, the 2016 AIAA/ ASME SDM award, the AAM Jr. Research Award, the ASC Outstanding Researcher Award, and several distinguished awards from the University of Michigan. Professor Waas’s research interests are: computational modeling of lightweight composite structures, robotically manufactured aerospace structures, 3D printing in aerospace, damage tolerance of composites, mechanics of textile composites and data science applications in aerospace engineering.
Professor Waas obtained his B.Sc in Aeronautics with First Class Honors from Imperial College, London, 1982, the ACGI in 1982, the MS and Ph.D in Aeronautics and Applied Mathematics (minor) from Caltech, 1983 and 1988, respectively.
Dr. Cheng Wang
Dr. Cheng Wang is a distinguished professor in State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology. His research area is in Computation explosion Mechanics with a recent focus on multi-scale modelling and simulation of the multi-physical phenomena subjected to explosion and impact loading conditions. Dr. Wang is the director of State Key Laboratory of Explosion Science and Technology, and Outstanding Youth Award from the National Natural Science Foundation of China. Dr. Wang has more than 100 publications based on funded research projects.
Dr. You-He Zhou
You-He is the Changjiang chair professor of the Ministry of Education of China from 2000, director of the Key Laboratory of Mechanics on Disaster and Environment in Western China, Ministry of Education of China, and dean of the College of Civil Engineering and Mechanics at Lanzhou University. He received his B.S. and M.S. degrees from Huazhong University of Science and Technology in 1981 and 1984, respectivelt, and the PhD from Lanzhou University in 1989. He has served as the faculty member of Lanzhou University since 1990, where he was promoted to associate professor in 1992 and to full professor in 1996. Professor Zhou has a background in electromagnetic behavior and nonlinear solid mechanics. His current research interests are focused on nonlinear dynamics analysis, electro-magneto-solid mechanics, and dynamic control of smart structures, including mechanical properties and behaviors of superconductive materials and structures, giant magnetostrictive materials, and sand movements. In these research fields, he has published more than 200 peer-reviewed international journal papers and one academic book entitled "Solid Mechanics on Electromagnetic Structures". His research contributiions received several major national awards on science, technology, and even education award in China, and two of his papers published on the international journal of IEEE Trans. Applied Superconductivity in 2007 were awarded the Best Contribution Prize by the IEEE Superconductivity Council in 2008.